Athlon model 8 and 10 set desktop VCore
The L11 bridge is used to set the VCore to be used when the CPU is in a desktop
motherboard. To rejoin a cut bridge, either the cut can be insulated and
bridged, or the gap can just be filled with conductive material.
The bridge configurations and the corresponding VCore settings are:
| Voltage (V) | L11 configuration |
|---|
| 1.850 |  |
| 1.825 |  |
| 1.800 |  |
| 1.775 |  |
| 1.750 |  |
| 1.725 |  |
| 1.700 |  |
| 1.675 |  |
| 1.650 |  |
| 1.625 |  |
| 1.600 |  |
| 1.575 |  |
| 1.550 |  |
| 1.525 |  |
| 1.500 |  |
| 1.475 |  |
| Voltage (V) | L11 configuration |
|---|
| 1.450 |  |
| 1.425 |  |
| 1.400 |  |
| 1.375 |  |
| 1.350 |  |
| 1.325 |  |
| 1.300 |  |
| 1.275 |  |
| 1.250 |  |
| 1.225 |  |
| 1.200 |  |
| 1.175 |  |
| 1.150 |  |
| 1.125 |  |
| 1.100 |  |
| No CPU |  |